The future of tile press equipment needs to breakthrough development from several aspects: first, keep up with international quality standards, develop independent innovative process design. It will move towards fully automated production standards. Second, under the condition of ensuring speed and accuracy, to develop a machine of multi-type tile press equipment, which can not only produce high precision and low error roof panel, but also change the type to make high strength wall panel. Used for industrial park buildings, factory buildings, logistics warehouses, private residential housing roof decoration cover.
Daily maintenance of tile press equipment:
1. When changing lubricating oil every month.Filters should be replaced or cleaned as appropriate.
2. Air filter on the tank. It is also inspected and cleaned every 3 months.
3. If the machine tool has the sound of daily operation and appears louder than usual, it is necessary to check the quality of oil and other problems in time.
4. It is very important to pay attention to cleaning hydraulic parts every month. Prevent the fine granular objects in the factory from causing unnecessary scratching and wear to the inside of the tile press.
5. Before feeding the tile press equipment, the positioning plate, the width of the corresponding material roll and the feeding equipment should be adjusted in time. After the material roll is brought into the guide frame from the guide roll, it is combed neatly through the guide roll and then entered into the rollers of the roller assembly. Each forming process of the material roll is designed and cold-formed by rollers with corresponding strength. The cutting of the formed sheet is carried out by the back shear, and then the production process of the sheet is completed.
6. monthly inspection, pay more attention to the oil level in the tank. If there is a partial failure of the hydraulic system, it is also necessary to carry out a secondary inspection. The fault source of the press tile machine equipment is completely repaired, which can avoid the same fault situation, the second occurrence.
7. About one month after the new tile press is put into production, it is necessary to carry out a corresponding debugging inspection on each component. Focus on checking the application of tile pressing machine equipment without deformation, distortion and damage of parts. If any abnormality occurs, replace and repair it in time.
