Double-layer color steel tile equipment manually moves the motor belt or big gear, and connects the T-keel main keel with T-keel pendant. If the T keel needs to be long, make the table rotate, and make the slide seat rise to the high point, use an object to support between the table and the bottom of the slide seat, the interface is fixed with T keel connector, the second keel and the main keel is inserted and connected between the accessories can not be used. If the ceiling has additional load or a large area of the ceiling, the U-shaped bearing keel is needed, so that the anti-skid seat falls naturally, causing an accident.
After the suspender of double-layer color steel tile equipment is fixed on the floor with the blast bolt, that is, after the suspender is installed, the U-shaped main keel is connected with the suspender with the U-shaped bearing keel hanger. Then connect the T longitudinal keel with the U main keel with the T keel pendant, power start the machine for test run, first empty run carefully observe whether there is vibration, noise, oil window oil. The mold can be installed only after the movement of each part is coordinated. When installing the mold, cut off the power supply.
Double layer tile pressing machine equipment by the motor through the pulley, drive the input shaft, through the pinion, big gear, drive the upper shaft. A set of CAM mechanism drives the sliding seat with upper die up and down to achieve tile pressing. The worktable transposition is installed on the upper shaft end gear group, drive the pin gear, the dial wheel installed on the hexagonal rotary shaft to achieve indexing positioning. The two ends of the upper shaft are equipped with a conjugate return CAM with the pressing CAM mounted on the same shaft, and the positioning rod and the positioning disc are used to realize the positioning of the lower die in the working position.
